SCM Series Single-Impeller Centrifugal Water Pump

The FENGHE SCM Series is a close-coupled, single-impeller centrifugal pump range developed for clean-water transfer, agricultural irrigation and general water-supply applications. Its design focuses on delivering practical flow rates at moderate heads, making it suitable for systems that do not require the higher pressure produced by a twin-impeller pump.

Flow-Oriented Water Transfer

The SCM Series includes SCM16, SCM22, SCM28 and SCM32 models. Across the available range, catalog maximum flow reaches up to 210 L/min, while maximum head reaches up to 32 metres.

This performance profile makes the SCM Series suitable for moving clean water between wells, storage tanks, irrigation lines and general water-distribution systems. The required model should be selected according to the actual operating flow and head rather than the maximum catalog values.

Typical Applications

• Agricultural irrigation
• Garden and greenhouse watering
• Well-to-tank water transfer
• Storage-tank filling and circulation
• Domestic and light-commercial water supply
• General clean-water distribution
• OEM water-transfer equipment

Single-Impeller Design

The SCM Series uses a single-stage, single-impeller centrifugal structure. This configuration provides a practical balance between water flow, moderate discharge head and straightforward system integration.

For applications requiring substantially higher discharge pressure or greater vertical elevation, the FENGHE SCM2 twin-impeller series may be more appropriate. For irrigation, tank filling and general clean-water movement, the SCM Series offers a more application-focused choice.

Suitable Liquids

These pumps are designed for clean, non-aggressive water without sand, fibres or abrasive solids. They are not suitable for sewage, corrosive chemicals, flammable liquids or heavily contaminated water. Confirm the liquid and operating conditions before ordering.

Model Selection

Please provide the following information for pump selection:

1. Required operating flow rate
2. Required operating head
3. Suction lift or inlet pressure
4. Pipe diameter and pipeline length
5. Available voltage, phase and frequency
6. Installation location and operating schedule

Installation Recommendations

Install the pump on a firm and level surface. Keep the suction pipe airtight and as short and straight as practical. Prime the pump before starting, prevent dry running and install appropriate valves according to the water-system design.

FENGHE supplies SCM centrifugal water pumps for agricultural suppliers, pump distributors, water-system installers and OEM equipment manufacturers.