FH600 Compact Welding Cooling Water Pump – 160 W
Key words:
welding machine pump
Cooling Water pump
coolant circulating pump
Small Water Pump for Cooling Water Tank
Welding Cooling Pump
Welding Machine Parts
Peripheral Water Pump
CEME MTP600 pump
Category:
Description
The FENGHE FH600 is a compact peripheral water pump for welding cooling tanks and equipment cooling circuits. The configuration listed here uses a 160 W motor with a three-phase 380 V, 50 Hz power supply. Its G1/4 inlet and outlet connections support integration into compact circulation assemblies.
The FH600 is intended for equipment manufacturers, replacement-parts suppliers, distributors and OEM buyers. Select the pump according to the required operating flow and pressure, coolant properties, electrical supply and installation layout.
Technical Specifications
| Parameter | Specification |
| Model | FH600 |
| Motor power | 160 W / 0.16 kW |
| Power supply | 380 V, three-phase |
| Frequency | 50 Hz |
| Nameplate current | 0.8 A |
| Speed | 2,760 rpm |
| Maximum flow | 8 L/min |
| Maximum head | 40 m |
| Inlet connection | G1/4 |
| Outlet connection | G1/4 |
| Pump weight | 3.6 kg |
Maximum flow and maximum head are separate performance limits. They are not available simultaneously. Request the performance curve to confirm flow at your required operating pressure.
Applications and Installation
The FH600 can be evaluated for welding-equipment cooling tanks, clean-water circulation assemblies and replacement applications where its hydraulic and electrical specifications match the original system.
Confirm mounting dimensions, connection fittings and available installation space before ordering. The supplied reference drawing shows 10 mm hose barbs and a 900 mm wire length; confirm these details for the ordered configuration.
Frequently Asked Questions
Can the FH600 run on single-phase 220 V power?
The configuration on this page requires three-phase 380 V, 50 Hz power. Contact FENGHE to confirm availability and specifications for other electrical configurations.
Does the pump deliver 8 L/min at 40 m head?
No. These are separate maximum values. The actual operating flow depends on circuit resistance and must be checked against the pump curve.
Can it circulate a glycol coolant mixture?
Provide the coolant type, concentration and operating temperature so material and seal compatibility can be checked before selection.
What information is needed for a replacement-pump quotation?
Send the original pump nameplate, required flow and pressure, power supply, connection sizes, mounting dimensions and order quantity.
Request a Quotation
For configuration checks and supply enquiries, email info@meccpower.com with your equipment requirements and quantity.
Selection Guide: How to Select a Cooling Pump for Welding Equipment